It may be bad storage on distribution site or something you can’t affect. You just can’t recognize it if you don’t do it every day, even in industrial setting you can notice it after few days so don’t think about it that much. You probably got bad batch of yeasts, it happens, I do the same thing and usually it is ok.
The dropping out of beer characteristics of yeasts is attribute after they die so you could get less vital batch or something it doesn’t say much.
For storing in fridge it is usually enough at about 5°C the yeasts settle down and you don’t need filtration or pasteurization for getting clean long lasting beer (when you store it correctly).
So tldr of your issue is probably combination of bad measurements and bad batch of yeasts, shit happens, and good luck on next try - you probably didn’t do anything wrong.
Congrats you made drinkable beer. At least it wasn’t complete loss.
Bad yeasts is pretty easy issue to solve so good luck on your next brews.
It is so interesting to me the uses of “leftovers” or byproducts of brewing.
From our brewery ve give the yeasts away to somebody who makes cosmetic products from them (but not too often usually it ends up dumped in sewer). And used up malt ends up as animal feed loads of people want it for chickens, sheeps, goats, cows you name it.
I consume these byproducts when they go though some animal :-)
Sometimes we get some chicken (3,5 kg or so large from small farm not the 1kg ones), and few months ago I got whole lamb.
Week ago I listened to a podcast about history of misinformation and censorship in first republic Czechoslovakia.
And tldr of it is that we didn’t learn anything - they wanted to regulate sale of newspapers and everyone listened radio.
I think there is big parallel the discussion about censorship was same, and when it was implemented it wasn’t effective. Be it Russian propaganda or some other affairs.
Yeah they have also registered page404.cz
I don’t have bolt but basic Sigma computer and it is possible so I would think that it is possible with more features rich device.
If it is bikepacking tour look in to bikepacking sublemmy [email protected]
One of the first few brews on the system I was helping to get started (and teach about brewing new guy) ended with boil off of about 1/4 of the volume. We then discovered that it had lower settings - 2000 wats was too much.
I never got to all in one brew systems, I had to try to deal with one and successfully made some beer.
Main issue for me was the inconsistent results but it may be my hands.
For boil off there are usually power settings so sometimes the larger loss is caused by forgetting to re-select the lower one.
From some more articles I grasped that it is shady. Some lobbying groups, secret commissions and stuff like that. They try really hard to not be the ones to point fingers at.
I think that there are more issues like archaic connectors and stuff like that. You can’t find new hardware with 30yo standard io.
The oldest version of Win I used was 95 about 2 years ago on chromatography machine (I think hplc or gas).
It is to my knowledge still in use in the school because the software don’t run on newer machines. The teacher told me that he don’t know what will he do when it dies. It isn’t really an issue on Linux.
Simon Tatham’s Puzzles
F Droid app that is regularly updated. It has 40 puzzles with weird names this one is named Keen.
Whacky annual race
You are right - you don’t see what’s under water. These are streams (op’s and mine photo) so there is usually hard gravel so no problem with 30mm+ tires.
In my case there were bigger stones so if you hit them in best case you fell off bike, in worst case you fell off and damage wheels.
Sometimes it is best to get off and push your bike.
I had to. It is few weeks old foto - behind me is steep gravel downhill and you see this streem in the last moment so I had to slam my brakes. One side had pretty big stones so if I didn’t check it I would end up in it.
It’s stupid but I understand. At these speeds you shouldn’t be allowed to ride there. When you don’t have to make an effort to get to this speed it is easy to lose track how fast you actually going. When you ride on bike path it is common to slow under 20km/h when it is full.
Here (in EU) I know lots of people who use them legitimately, but no one checks for removal of speed limiter.
Now at least they have to have insurance so it may decrease the number of a-holes because it is easy to check.
I think that e-bikes and e-scooters are misrepresented by few a-holes who makes motorbikes from them.
Yes when you brake the law and are going 30 km/h in a bike lane you are a-hole but most of them are ok.
It was built 100 yers after lager brewing proces and ~500 years after hops usage. 200 years ago or so the brewing process became more industrialized, this brewery was modernized multiple times and was in use until 1977.
In about 200 years it basically didn’t changed. But these really old technologies and history is interesting too, you just refer to something at least 100 years off of what I refer to in my post.
I hope that I will visit National museum of brewing technology this fall, they have loads of instruments, machinery and stuff from 19th and early 20th century when they really experimented with the process. In my opinion it is most interesting part of industrial brewing history.