Para_lyzed

The linked article does a great job explaining the process of creating a theme assuming you have the SVG files. If you are asking how to create SVG files, then just use any vector editor (like Inkscape, for instance). You can find plenty of tutorials on how to create vectors through online video tutorials.

Sorry for the late reply, I’m not on Lemmy often.

It seems that, according to a Reddit thread, the Nobara kernel should include support for ec_sys. What does the command modinfo ec_sys output? If it doesn’t return modinfo: ERROR: Module ec_sys not found., then you should just be able to enable it with sudo modprobe ec_sys and then enable it persistently across reboots with echo ec_sys | sudo tee -a /etc/modules

EDIT: Replaced output redirection with sudo tee in case you are not running the command as root.

I’m not really sure what it is you’re asking for here. As another commenter said, ps outputs a list of newline separated entries (using \n, the standard LF character). I even ran some sanity checks to make sure it wasn’t using \r\n (CR LF) with the following:

$ ps aux | grep $USER | tr -cd "\n" | wc -m
14
$ ps aux | grep $USER | tr -cd "\r" | wc -m
0

The output of ps aux | grep $USER is consistent with the formatting of ps aux. I also found that ps aux | grep $USER was consistent with ps -fp $(pgrep -d, -u $USER) except that ps -fp $(pgrep -d, -u $USER) shows the header (UID PID PPID C STIME TTY TIME CMD), does not show the processes related to the command (entries of ps aux and grep --color=auto $USER), and does not show grep’s keyword matching by highlighting all matches within a line. It is otherwise completely identical.

Can you provide the output that you are getting that is unsatisfactory to you? I don’t think I can otherwise understand where the issue is.

Can you paste the output of the build so we can see what specific package it is missing? Qt is not a single package, and it’s very likely that you need the developer package qt-devel and its associated libraries to build, not just the base package.

Just a thought, but since someone else in the thread said you can stream to Chromecast via VLC, you can desktop capture natively in VLC and stream that to your Chromecast. I can’t remember if the native capture can do sound or not, but if not, you can instead use OBS virtual cam (you’ll need v4l2loopback for the virtual cam to show up), and open that as a capture device in VLC. You should be able to attach an audio source to that as well. While I haven’t personally tested it with audio, I have used OBS virtual cam with VLC before, and it worked flawlessly for me. If you can’t find a more elegant solution, then it’s worth a shot to try and see if it works

While I haven’t personally tried it, I’ve heard people have issues with cooling when using the M.2 hat, especially when using their Pi for intensive applications (like hosting a Minecraft server). I’d honestly recommend just getting a 2.5" USB drive enclosure and an SSD. Costs about the same amount of money without the drawback of poor cooling. You can use it with any case, since it just connects via USB. I have been running my Pi this way for years (in fact I have never used an SD card in it).

I agree with this sentiment 100%, but I think it lacks some of the context that these are children we are talking about. They aren’t being educated on privacy or security; not by their schools, and certainly not by their parents. This generation is being raised to believe that everything they do and say needs to be posted online to social media, and their concept of privacy is virtually nonexistent. Couple that with the fact that most of them don’t have a personal computer, and it leads to great levels of negligence with regard to their use of technology, and most relevant to this discussion, their use of school computers. The children being surveiled and exploited by this software don’t have the education on it to understand why it is bad, or even that it is happening to begin with.

So while yes, they shouldn’t have private communications on school computers, they don’t have the context to understand that or independently come to that conclusion themselves, thus those private communications will happen nonetheless.

I am also experiencing this issue on Fedora 40 with the Negativo drivers, and I believe this is a flatpak issue. Here is a GitHub issue detailing the problem. Allegedly it has been fixed, but I have updated to the latest commit and am still having the same issue, so I am unsure what to do (I’ve spent a number of hours trying to troubleshoot this). You might have luck just running a flatpak update, as that is supposed to solve this issue (YMMV though, it didn’t fix it for me).

No, here is the official RPMFusion documentation for it, which is linked to in the Nvidia driver documentation from RPMFusion.

As far as typing tests/training goes, I tend to be much more of a fan of something like monkeytype, which offers a much nicer and more customizable interface, real time feedback on speed and accuracy, and has a quotes mode that essentially is what you are looking for. Though you can copy/paste a large chunk of text in custom mode if you prefer to actually type an entire chapter of a book.

Just thought I would provide another tool as an alternative

Matrix leaks tons of metadata, and its encryption lacks perfect forward secrecy. Additionally, it requires an email to sign up, and there are accounts with unique identifiers.

Simplex does not have any accounts or identifiers, everything is stored entirely locally. Additionally, it is based on the double ratchet Signal protocol, with improvements made for post-quantum encryption. It does not require anything to sign up, as there are no accounts. Metadata is not leaked as it is with Matrix, as everything is encrypted or obscured. Messages are padded to 16KB, the sender/receiver is not attached to the message, and there are fake messages being sent to obscure the identity and frequency of contact of those you are talking to even under monitoring of your network. Additionally, for anonymity, SimpleX is allowing for repudiation so that you cannot prove that a specific person sent specific messages, allowing doubt if messages were to be use in a court case, for instance. It is the trend (especially from a security perspective) to implement nonrepudiation, but the SimpleX team decided to remove it to protect users (after years of it being present in SimpleX chat). This is a protection intended for journalists, but it extends to many other cases as well.

Matrix is a nice toy, but SimpleX chat is built for anonymity above all else, and it does that job far better than Matrix ever has or will.

Do you not consider Alpine Linux to fall into the general category of “Linux”, then? It lacks GNU user space utilities, though there is never a world where I would not consider it a “Linux” operating system. You seem to be overgeneralizing here and making assumptions about OP’s intentions that aren’t based in fact. I don’t see the point in drawing meaningless lines, here. What you’re referring to (as described by the GNU project) is GNU/Linux, not “Linux” by itself. The two are often but not always used interchangeably, and treating them as exactly the same leads to major outliers, like Alpine. I’ve heard plenty of people use the term “Linux” in practice to describe software running on embedded devices that don’t contain GNU utilities, so this isn’t exclusive to Alpine. In fact, the only real exception that I see consistently to operating systems that run the Linux kernel is Android, so it makes much more sense to formulate a description of the generic term “Linux” as simply having an exception for Android, though I’d argue that the only reasons that Android isn’t viewed as “Linux” is because it is a mobile operating system, it is developed with the sole intention of including non-free, proprietary software (AOSP by itself isn’t meant to be the full operating system on any device, but rather a framework), and the fact that the structure of the filesystem and the way apps are run differ completely from the ways of traditional “Linux”. It seems to be an exception purely by the fact that it operates in fundamentally different ways than other “Linux” operating systems.

Fedora is what I’d describe as cutting edge, but not bleeding edge. It’s still behind from source, and is semi-rolling release, so it’s further behind than Arch but way ahead of stable/fixed release distros like Debian

Idk, I think Gentoo and Void would be worse for a new user. But yeah, most other distros will be more new user friendly. Bazzite has a great new user experience, for instance

Not sure what the title was before you changed it, but if I see a post in my feed that looks like this (without the “very bad take” part), I wouldn’t even want to open the post to see the description. I’m glad you clarified by editing the title, but without making your stance clear in the title from the very beginning, it would be bound to receive a barrage of downvotes.

This is a bit late, but I just wanted to follow up to let you know that Fedora 40 updated to kernel 6.9 last week.

Fedora has pretty good SELinux configured out of the box, and isn’t focused on opsec. It’s just sane defaults and proper limitations to access. It also switched to Walyand-by-default this release, completely removing X11 from the default packages, which mitigates many of the “app spying on other app” scenarios that a previous user in the thread was talking about. That’s not to say that Fedora is the pinnacle of Linux security or anything, but it comes with pretty good defaults for the average user. You’d have to get into kernel hardening and deep into SELinux to do better as an end user, which is not something that most users are inclined to spend time or energy on.

Seconding partclone here, it’s the easiest solution for imaging that only backs up the data on the partition that is used. Plus, it’s in RescueZilla, which is pretty intuitive and user friendly for those that prefer GUIs

Shouldn’t be too long left, I’d expect it to hit Fedora 40 sometime this month. I also shared instructions on how to temporarily upgrade the kernel to the one in Fedora 41’s repos (which is past 6.9) if you were interested in trying that, though the instructions are untested as of yet (the issue doesn’t affect me since I don’t play games). It’s easily revertible if you wanted to give it a try. I probably wouldn’t bother if you use secure boot, because I’ve had issues with signing things before with similar steps, though those are the official steps from the Fedora documentation, so it may be that they just work fine.

Is it related to the issue described in the post attached to this comment? The linked comment also links to an issue page with details about the issue the poster experienced. If so, then that issue should actually be fixed in kernel 6.9 (which still has not been added to the Fedora 40 repos), and not caused by it.

An extension of this issue is present in 6.8.9+ before 6.9, which is why I ask if this seems to be related (since the versions are pretty close in time and Fedora doesn’t even have 6.9 yet).