Tried just plugging it in and it was treated like a normal USB

    • 20gramsWrench@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      alright that’s good, that means it’s seeing the key as bootable, you need to enter the bios config, same procedure, but it’s another f key, then you will find an option that’s called secure boot and you can change it from “enabled” to “disabled”, on some bios, you first need to erased the stored secure boot key first

        • 20gramsWrench@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          5
          ·
          1 year ago

          it shouldn’t reset your device, secure boot is only there to prevent someone from doing exactly what you’re trying to do, booting another os on the computer, that said, if you’re going to mess around with a linux installer without full knowledge of what you are doing you should absolutely back up your entire drive first, the easiest method being phisically removing the hard drive and putting another one in

            • 20gramsWrench@lemmy.dbzer0.com
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              in the bios config menu, you can access it when you start up your computer and spam the appropriate keyboard key, you can find out which key it is by the brand of the computer, or the brand of the motherboard if you assembled the pc yourself, then inside the bios config menu you will find the secure boot option.

              for example, on my computer, I need to turn it off completely, then press the power button and quickly press the f2 key repeatidely, then instead of launching my operating system, it launches the bios config menu, and in that menu, under the “boot” section, I find a line called “secure boot” which I can enable and disable, once i’ve done so, I press f10 to save the configs I made, and boot my system where I want