I provisioned an Ubuntu 22.02 server at Linode. I chose their 2 GB Shared CPU instance type. Once I configured the server to my liking, I ran through the Lemmy-Ansible instructions. (They have other methods, so check the documentation.)
Essentially, you install Ansible on your workstation. I’m on macOS and installed it via Homebrew. You then download their git repository, create the necessary configuration files, and then have Ansible configure the server. It was fairly simple.
I have a lab at home and do host some stuff for myself from there in a small DMZ (ie: Miniflux RSS readers, Plex through Reverse proxy etc).
But I used a linode for my lemmy/kbin stuff. Reason being is that the code is fairly new and there may be exploits bugs and
I dont want to deal with my ISP made an instance is exploited and becomes some type of C2 box or spews out spam. Kbin specifically already has PRs to fix XSS and Sql injection stuff, the former of which is usually avoidable if you just follow some pretty basic principles. So its a concern.
Linode has better bandwidth than my non-symmetrical ISP uplink and is on its own quota.
It sounds like linode is the way to go then and their prices seem reasonable. The funny thing is I’ve heard of linode before because Computer Clan uses it as a sponsor, but ever since I started using sponsor block I haven’t really heard about it. I didn’t actually know what they did.
I’ve run linodes for years. My blog runs on them. I still host a variety of other services on them. They are good for everything from gaming servers to a blog etc.
They did get bought out by akamai a while back. And have raised their prices but they are still solid.
I am currently the only user. Im considering opening it up to limited users but not really having communities once i get a lot of the instances cached and indexable.
Others like @[email protected] are running on a 2GB shared just fine. I will likely move to that if i choose to keep it solo for sure, or under 100 users and no communities.
I dont have the time to really moderate others or content on the instance. So i dont think I plan to host any communities at all. I do wish you could federate/sync specific communities to your instance to make searching/subscribing easier.
That’s exactly what I’m wanting to do. Just have myself and maybe a few others with limited communities. Would you recommend using ansible to setup a Lemmy on Linode?
Yes the ansible config worked fine for me. I worked for days to get an kbin instance up. Ansible worked first go.
I have yet to get email working but otherwise its solid. Linode will block email btw if you account is new (and frankly may be blocking mine now). You just have to put in a case and justify and it should be fine. My account should be old enough to be exempt but I will likely do it anyhow. Their support is pretty good.
Getting federation crawled and communities added is a bit slow. Mostly because the other instances are a bit slow.
A few pointers if you havent done admin yet.
Put nothing in the federation allow list unless you want to go whitelist only. Over time as other instances hit yours and you search others, the linked list of instances will grow. Just use the blocklist if you want to block certain instances. I havent found a good way to block the growing number of instances in case they have some illegal content like CSAM. So…i may just go whitelist anyhow
Searching for instances seems to be CPU heavy on mine. Its not a problem though. You just cant simply plug in a URL of a community in another instance if you havent linked. You will get a 404 if you do. So you have to go to search, looking for that community by hitting search a few times until it shows up, then you can join and it will start crawling
I have no idea what “Private instance” does other than i believe it will keep your instance form starting in the future if you have it checked AND federation turned on. I saw some logs in dockers startup when i did it but nothing in the UI.,
You’re talking about Lemmy, right?
I provisioned an Ubuntu 22.02 server at Linode. I chose their 2 GB Shared CPU instance type. Once I configured the server to my liking, I ran through the Lemmy-Ansible instructions. (They have other methods, so check the documentation.)
Essentially, you install Ansible on your workstation. I’m on macOS and installed it via Homebrew. You then download their git repository, create the necessary configuration files, and then have Ansible configure the server. It was fairly simple.
I may go that route. I was wanting to host my own server but I feel like it would be easier to just use a cloud server
I have a lab at home and do host some stuff for myself from there in a small DMZ (ie: Miniflux RSS readers, Plex through Reverse proxy etc).
But I used a linode for my lemmy/kbin stuff. Reason being is that the code is fairly new and there may be exploits bugs and
I dont want to deal with my ISP made an instance is exploited and becomes some type of C2 box or spews out spam. Kbin specifically already has PRs to fix XSS and Sql injection stuff, the former of which is usually avoidable if you just follow some pretty basic principles. So its a concern.
Linode has better bandwidth than my non-symmetrical ISP uplink and is on its own quota.
It sounds like linode is the way to go then and their prices seem reasonable. The funny thing is I’ve heard of linode before because Computer Clan uses it as a sponsor, but ever since I started using sponsor block I haven’t really heard about it. I didn’t actually know what they did.
I’ve run linodes for years. My blog runs on them. I still host a variety of other services on them. They are good for everything from gaming servers to a blog etc.
They did get bought out by akamai a while back. And have raised their prices but they are still solid.
Nanodes are awesome deals frankly.
Is the 2GB the one you use for your Lemmy server? I’m getting ready to purchase one to see if I can figure it out.
Im currently on the 4GB dedicated. However heres an htop of it.
https://imgur.com/a/NpEsw4t
I am currently the only user. Im considering opening it up to limited users but not really having communities once i get a lot of the instances cached and indexable.
Others like @[email protected] are running on a 2GB shared just fine. I will likely move to that if i choose to keep it solo for sure, or under 100 users and no communities.
I dont have the time to really moderate others or content on the instance. So i dont think I plan to host any communities at all. I do wish you could federate/sync specific communities to your instance to make searching/subscribing easier.
You mean something that populates your server with a history of posts and comments to communities before your subscribe to them?
That’s exactly what I’m wanting to do. Just have myself and maybe a few others with limited communities. Would you recommend using ansible to setup a Lemmy on Linode?
Yes the ansible config worked fine for me. I worked for days to get an kbin instance up. Ansible worked first go.
I have yet to get email working but otherwise its solid. Linode will block email btw if you account is new (and frankly may be blocking mine now). You just have to put in a case and justify and it should be fine. My account should be old enough to be exempt but I will likely do it anyhow. Their support is pretty good.
Getting federation crawled and communities added is a bit slow. Mostly because the other instances are a bit slow.
A few pointers if you havent done admin yet.
Put nothing in the federation allow list unless you want to go whitelist only. Over time as other instances hit yours and you search others, the linked list of instances will grow. Just use the blocklist if you want to block certain instances. I havent found a good way to block the growing number of instances in case they have some illegal content like CSAM. So…i may just go whitelist anyhow
Searching for instances seems to be CPU heavy on mine. Its not a problem though. You just cant simply plug in a URL of a community in another instance if you havent linked. You will get a 404 if you do. So you have to go to search, looking for that community by hitting search a few times until it shows up, then you can join and it will start crawling
I have no idea what “Private instance” does other than i believe it will keep your instance form starting in the future if you have it checked AND federation turned on. I saw some logs in dockers startup when i did it but nothing in the UI.,