For me, it was PhotoPrism. I used to be an idiot, and used Google Photos as my gallery. I knew that it was terrible for privacy but was too lazy to do anything about it. When Google limited storage for free accounts, I started looking for alternatives. Tried out a lot of stuff, but ended up settling on PhotoPrism.
It does most things that I need, except for multiple user support (it’s there in the sponsored version now). It made me learn a bit about Docker. Eventually, I learned how to access it from outside of my home network over Cloudflare tunnel. I’m happy that I can send pics/albums to folks without sharing it to any third party. It’s as easy as sending a link.
Now I have around a dozen containers on a local mini pc, and a couple on a VPS. I still route most things through Cloudflare tunnels (lower latency), only the high bandwidth stuff like Jellyfin are routed through a wireguard tunnel through the VPS.
Anyway, how did you get into selfhosting? (The question is mostly meant for non-professionals. But if you’re a professional with something interesting to share, you’re welcome as well.)
Around the 2000s I hosted a Shoutcast server that played a playlist of about 30 punk rock MP3’s on continuous loop. As far as I can remeber, it was running on a Win2000 machine. Yeah - Pirate Radio 😆
Copyright?
Never heard of him.
My own wordpress website to host recipes on a Synology NAS. Unfortunately, the built in NGINX server has some default configuration (from Synology) so that it cannot properly serve the Wordpress REST API. The NAS is (according to Synology) to weak to run a container, where I could easily run a separarate server. So I gave up and just recently bought a Dell Optiplex Micro, which I will turn into my new homeserver. Guess I will keep the Synology for storage though.
I wanted to host my own website, so I got a VPS. After that, I got addicted to spinning up servers for various services.
At the beginning of the pandemic I looked into ways to de-Google and found Nextcloud. It wasn’t the easiest thing to start with, especially for a novice, but I had the time and the hardware, and I’m the type to not mind jumping into something difficult if it means solving a specific problem. I then found out about Bitwarden and had a great experience setting that up. After that I was confident enough to try hosting anything I could find. It’s been good times ever since 😀
I also started with nextcloud because of my degoogle journey 😄
2003 I had a custom built full ATX tower with some parts from work running RAID for disk storage, and three cable capture cards. The box ran MythTV to record and serve shows DVR style to my modded Xbox that I had loaded XBMC on. From there I moved over to Plex for watching the recorded shows and ripped my DVD and VHS collection.
Mid 90s, my ftp server with music and warez over dial-up that wasn’t always online!
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters DNS Domain Name Service/System HTTP Hypertext Transfer Protocol, the Web IP Internet Protocol NAS Network-Attached Storage PiHole Network-wide ad-blocker (DNS sinkhole) Plex Brand of media server package RAID Redundant Array of Independent Disks for mass storage VPN Virtual Private Network VPS Virtual Private Server (opposed to shared hosting) nginx Popular HTTP server
10 acronyms in this thread; the most compressed thread commented on today has 14 acronyms.
[Thread #3 for this sub, first seen 18th Jul 2023, 22:20] [FAQ] [Full list] [Contact] [Source code]
1TB hard drives were on sale, and I wanted to digitize all my DVDs and stream them to my Xbox 360. That was 15 years ago.
Having own media library without having to use so many sub based services :)
- Privacy :)
A pihole. Given how much I’ve spent over the years on self hosting kit, few ‘cheap’ things have ended up costing me more than that first 30 quid raspberry pi
Probably Apache? I’ve been running web servers since the early 2000’s.
Yeah. Probably Apache. Can’t remember what that I was doing, but it almost certainly ran on Apache, and I almost certainly spent 90% of my energy configuring Apache.
XAMPP? I started with that in Secondary School (equivalent to high school)
After picking up a set of Hue bulbs and using them for a while I wanted to do more in terms of automation especially when arriving home etc. I found home assistant and never looked back.
Back then I was using a raspberry pi but upgraded to a dedicated Debian box a year later to which I’m not running around 50 containers.
Off topic but could you explain a little on how you use a VPS to access your internal services? There’s a few services I want to open up but I don’t trust cloudflare and I don’t want to port forward.
Not the OP, but my current solution involves a small instance in AWS with a wireguard server in docker. This is configured with a few peers. One peer is a container on my home server that can access my jellyfin deployment. This container is also running socat to redirect the traffic to jellyfin. Then my phone and laptop are the other peers and I have a DNS record pointed to the IP of the wireguard peer on the server, if that makes sense.
I’ve been using this image pretty painlessly. The only hiccup I had with setup was ensuring persistent keep alive was configured on the peer forwarding traffic to jellyfin.
Basically what the other guy said. I have a wireguard tunnel set up between my home server and the VPS, with persistent keepalive. The public domain name points to the VPS, then I have it set up (simply using iptables) so that any traffic there in port 80 and 443 is sent back to my honeserver and there it’s handled by nginx reverse proxy, and sent to jellyfin.
So, the only ports I need to open are 80 and 443 on my VPS to make this setup work.
2006 Our Highschool had “recycled” some of the older machines and it started from there.
A Dell Optiplex GX1 500MHz, with 128mb of ram, and a 80gb IDE HHD. Installed Debian Sarge, This was running a dial-up gateway for our home network as well as samba.
It allowed one machine to be the LANs internet connection, abet slow. Samba was so I could download installers once, and then pull them from the network drive.
2008-2012 that machine was a dedicated WordPress machine. Around 2019 I pulled it out of the closet and powered it up. The whole site was there, still ran without a hiccup. It was actually recycled shortly after that, Dell used to make great hardware.
Honestly? Probably boredom. Computer-related projects are addictive to me.
Haven’t ventured too far, but searxng was my first selfhosted service. It’s very easy, single container, no database.
