• remer@lemmy.ml
    link
    fedilink
    arrow-up
    9
    ·
    1 year ago

    Exciting news but they still have a long way to go before commercial availability:

    The big problem is that the devices are horrifically short-lived. Even the most stable device made by the first group had dropped to 80 percent of its original efficiency after just 66 hours of exposure to sunlight. The second was somewhat better, managing to reach 347 hours before dropping below 80 percent. Assuming 12 hours of sunlight a day, however, that translates to less than a month of use, which is terrible.>

  • Big P@feddit.uk
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    I’m surprised that regular solar panels are only around 20% efficient. I hope eventually we’ll see much higher efficiency solar panels become available

    • BestBouclettes@jlai.lu
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      To be fair, they used to be much lower than that a few years ago. Like 5%. So it’s going in the right direction, even though it’s actually challenging to find a good balance between efficiency and lifespan

      • Big P@feddit.uk
        link
        fedilink
        arrow-up
        1
        arrow-down
        1
        ·
        1 year ago

        I’m surprised because I would have assumed that they would be at least 50% efficient given how long they have existed and how ubiquitous they are. I’m sure many billions have been put into research and development of solar power and for 30% to be a noteworthy achievement after decades is surprising to me

        • cosmic_skillet@lemmy.ml
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          But where is this 50% efficiency number coming from? Are you familiar with the Shockley–Queisser limit on PV efficiency?

          I mean I could “expect” internal combustion engines to be at 75% efficiency by now given the billions of dollars of R&D spending over a century and a half of time, but that would be ignoring things like the Carnot cycle.

          Besides, the most important metric for solar power is typically cost, not efficiency. We do have multi junction solar cells with efficiencies approaching 50%, but they’re not widely used because they’re incredibly expensive. It’s a much better deal to use solar modules that are half as efficient, but 1/10th the cost.

          The final point I want to make is that a single percentage point gain in absolute efficiency is huge when the overall efficiency is low. A single percentage point gain in absolute efficiency is small when overall efficiency is high. For example, if you increase a 5% efficiency solar module to 6% then you’ve actually increased energy output by 20%. That’s a big improvement. But if your base rate efficiency is already 50% then going to 51% represents only a 2% increase in energy output. Not really a big deal. This is why improving a 20% efficiency module to 25% is a big deal. It’s a 25% increase in energy output for the same cost. For energy economics that’s insane, even though it’s “only” a 5% increase in absolute efficiency.

          By far the biggest story in solar energy over the past few decades has been the collapse in costs to the point that large scale solar projects are selling electricity at ~3¢/kwh. This means that in many locations it’s now cheaper to build brand new solar generation than to operate old, fully capitalized coal power plants. The other big point is that given the scalable nature of solar PV, new projects can be up and running within a year of breaking ground. Now obviously intermittent energy sources like PV without storage are not the same as a baseload coal plant, but this crude cost comparison represents an ongoing seismic shift in energy markets.