i have swapped my conbee 2 to sonoff dongle (p version) and have a few issues.

I have 2 xiaomi temp sensor (same model) and i’ve only be able to link one, other one i shown as unsupported. Same thing happened with 2 tuya temp sensor, only one is shown as supported.

I have updated sonoff dongle firmware but that didn’t change anything, chnaged batteries and tried to pair multiple times but no luck

Any reason why, any tips?

  • paf@jlai.luOP
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    11 months ago

    thanks for helping, I’m running a VM with HA OS (proxmox), i just realised that z2m crash when trying to pair those devices and watch dog isn’t starting z2m back. I might load a backup when i was using my raspberry with conbee 2 and replace sonoff dongle by conbee 2 to see if same thing is happening which would indicate it has something to do with my proxmox VM

    here are the logs when i try to pair:

    Zigbee2MQTT:info 2023-11-28 16:13:42: Zigbee2MQTT started! Zigbee2MQTT:info 2023-11-28 16:13:48: Zigbee: allowing new devices to join. Zigbee2MQTT:info 2023-11-28 16:13:48: MQTT publish: topic ‘zigbee2mqtt/bridge/response/permit_join’, payload ‘{“data”:{“time”:254,“value”:true},“status”:“ok”,“transaction”:“fh35x-1”}’ Zigbee2MQTT:info 2023-11-28 16:13:52: Device ‘0xa4c138d5784acca7’ joined Zigbee2MQTT:info 2023-11-28 16:13:52: MQTT publish: topic ‘zigbee2mqtt/bridge/event’, payload ‘{“data”:{“friendly_name”:“0xa4c138d5784acca7”,“ieee_address”:“0xa4c138d5784acca7”},“type”:“device_joined”}’ Zigbee2MQTT:info 2023-11-28 16:13:52: Starting interview of ‘0xa4c138d5784acca7’ Zigbee2MQTT:info 2023-11-28 16:13:52: MQTT publish: topic ‘zigbee2mqtt/bridge/event’, payload ‘{“data”:{“friendly_name”:“0xa4c138d5784acca7”,“ieee_address”:“0xa4c138d5784acca7”,“status”:“started”},“type”:“device_interview”}’ Zigbee2MQTT:info 2023-11-28 16:13:53: MQTT publish: topic ‘zigbee2mqtt/bridge/event’, payload ‘{“data”:{“friendly_name”:“0xa4c138d5784acca7”,“ieee_address”:“0xa4c138d5784acca7”},“type”:“device_announce”}’ Error: Unhandled error. (TypeError: Cannot destructure property ‘vendor’ of 'data.device.definition’ as it is null. at EventEmitter. (/app/data/extension/miboxer-fut089z-controls-exposer.js:151:21) at EventEmitter.emit (node:events:525:35) at EventBus.emitDeviceMessage (/app/lib/eventBus.ts:102:22) at Controller. (/app/lib/zigbee.ts:108:27) at Controller.emit (node:events:513:28) at Controller.selfAndDeviceEmit (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:527:14) at Controller.onZclOrRawData (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:738:18) at ZStackAdapter. (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:144:70) at ZStackAdapter.emit (node:events:513:28) at ZStackAdapter.onZnpRecieved (/app/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:823:30)) at new NodeError (node:internal/errors:387:5) at ZStackAdapter.emit (node:events:502:17) at emitUnhandledRejectionOrErr (node:events:394:10) at processTicksAndRejections (node:internal/process/task_queues:85:21)`

    here are the devices that failed to pair: https://www.zigbee2mqtt.io/devices/WSDCGQ11LM.html (i have 3 of those and one is failing to pair)

    https://www.zigbee2mqtt.io/devices/TH02Z.html#tuya-th02z (did a mistake as i have 2 of them and none are pairing)

    couple more devices that fails since i started thi post: https://www.zigbee2mqtt.io/devices/AB3257001NJ.html#osram-ab3257001nj

    https://www.zigbee2mqtt.io/devices/ERS-10TZBVK-AA.html#tuya-ers-10tzbvk-aa

    Edit: HA fail to load my backup file, saying it needs a .tar file (but i did point to a .tar file), will do a fresh install and load my backup to see if same is happening

    Edit2: issue with backup file was due to firefox, works in chrome

    Edit3: using my backup and conbee, everything works fine (at one exception, a zigbee remote which i remember was a pain to setup. remote is paired but not working yet… https://www.zigbee2mqtt.io/devices/FUT089Z.html